Full Servo Baby Diaper Machine (500 pieces/Min)

Detailed Product Description
PARAMETER OF EQUIPMENT FUNCTION

1.Designed speed        220m/min

2. Working speed        450pcs/minSmall size

3.   Qualified rate         97

The rate is compared with qualified products with gross output products within7.5 hours

4.   Efficiency              ≥85

The rate is compared real output with principle output within 7.5  hours

5.   Installed capacity       345KW (Including hot melt system)

6.   Electric power supply   : Three-phase & four-wire 380V/50HZ(Ground wire)

7.  Lowest barometric pressure :8kg/cm²

8.   Gross weight          70000kg

9.   Noise                85dBA

10. Outer size             25M×1.95M×2.2M

11. Color                 Silver

12. Range of products      XLLMS

13. Length of products:    540mmXL500mm(L)450mm(M)390mm(S)

Features:
1) Sawmill crushing machine can crush untreated pulp, half-treated pulp and treated pulp. Pulp feeding is controlled by convertible frequency
2) Upper sanitary paper supplied, center auto-unwinding, constant tension control and automatic feeding
3) Cotton core formed by double net wheels
4) SAP adding device and quantity can be adjusted. Controlled by convertible frequency
5) Knurling and compacting core device are provided
6) Down sanitary paper supplied by cutting and transferring, constant tension control, center auto-unwinding and automatic feeding
7) Cotton core is cut down
8) Standing cuff, constant tension control auto-wind and automatic feeding, deviation rectifying guide
9) Back sheet film supplied, center auto-unwinding, constant tension control and automatic feeding, deviation rectifying guide
10) Frontal waist tape supplied, shut down and transferring
11) Elastic supplied and auto-unwinding
12) Surface absorbing cotton core, back sheet compound and compacted
13) End and side sealed by hot pressure
14) Side elastic embossing
15) Right and left elastic band supplied, center auto-unwinding, constant tension control and automatic feeding
16) Elastic right and left band embossing
17) Right and left waist tape supplied, cut down and transferring
18) Right and left elastic band cut down and transferring
19) Products are folded longitudinally and compacted
20) Products are cut finally
21) Products are rejected automatically
22) Products are tri-folded
23) Products are output
24) Driving system
25) Pneumatic system
26) PLC controlling system
27) Touchable screen